* FREE DELIVERY AUSTRALIA WIDE *

Merlin Receiver plus M842 Merlin Remote

· The Merlin Receiver is enclosed in a hard plastic case and is easy to attach to your motor. It is designed for interior use only.

· Exterior buttons are built into the case for a manual pushbutton control and for ease of remote programming. An LED provides diagnostic feedback and confirms receiver status.

· This receiver can be used to control simple alarm systems, most brands of garage door or gate opener or to drive other relays / contactors within the specifications.

· An independent plug pack may be used if the controlled device does not supply the required power.

· This Merlin receiver may be used to upgrade older garage door openers to the 433RF radio in order to get added security, compatibility with new accessories or to replace radio equipment that is no longer legal to sell.

· Included are spade connectors for ease of connecting directly to older Merlin openers. A wire antenna is soldered directly to the receiver

Specifications

Receiver type Super heterodyne, SAW filter on RF front end 433.92 MHz, FM-FSK
Approvals Australia NZ & UK
Out-puts 1; via signal relay contact (SPNO)
Dimensions 45 x 135 x 23h
Max switching load 1 Amp @ 30V ac/dc
Input voltage 12 -24 Vac/ dc nominal 9 -28V ac min / max 9 - 40V dc min / max
Power usage 30 - 50mA
Momentary / toggle Select by bridging link. (Factory set on “mom” with link off)
Learns up to 20 code hopping or unlimited fixed code devices that use the same code setting
Operating range Typically 50 - 100 meters (range may vary subject to receiver location)
Merlin radio upgrade adapter harness

BDR2 1111 (5 pin) model 1000 transmitter (1986 - 1987)

BDR2 1112 (8 pin) model 2000-2200 transmitter (1988-1995) (1988—1990)

BDR21112 (8 pin) model 2000,2200,2100 & M800 transmitters (1987 - 1996) approx

Compatibility

Compatible with M842, M844 mini remotes
Compatible with M832, M834, M832F, M834F, M832C & M834C standard remotes
M840 wireless keypad
M128 wireless wall control box

$195.00